Nokia 6136 User Manual page 54

S e t t i n g s
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS, if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or
(circuit switched data, CSD).
To define how to use the service, select
Packet data > Packet data connection
When needed — to set the packet data registration and connection to
established when an application using packet data needs it and closed when you
end the application.
Always online — to set the phone to automatically register to an packet data
network when you switch the phone on.
EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or EGPRS
connection, or indicates that the GPRS or EGPRS connection is suspended
(on hold).
Packet data settings
You can connect the phone using an infrared, or a USB data cable connection to a
compatible PC and use the phone as a modem to enable EGPRS or GPRS
connectivity from the PC.
To define the settings for EGPRS or GPRS connections from your PC, select
Menu > Settings > Connectivity
access point, and activate the access point you want to use. Select
access point > Alias for access
settings, and select OK. Select Packet data access
name (APN) to establish a connection to an EGPRS or GPRS network, and select
OK.
You can also set the EGPRS or GPRS dial-up service settings (access point name)
on your PC, by using the One Touch Access software. See "Nokia PC Suite," p. 88.
If you have set the settings both on your PC and on your phone, the PC settings
are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another
compatible device (for example, a mobile phone), a compatible PC, or a remote
Internet server (network service).
Your phone allows data transfer with a compatible PC or another compatible
device when using the phone without a SIM card. Note that when you use the
54
Menu > Settings > Connectivity
and one of the following options:
or indicates that the GPRS or
> Packet data > Packet data settings
point, enter a name to change the access point
point, enter the access point
GSM data
>
> Active
Edit active