Parameter Setting Of The Detector - Bosean Electronic Technology BH-4S User Manual

Bosean Electronic Technology Co.,Ltd
Language
Information
Back light
Time set

4.4.3 Parameter setting of the detector

Display
Fig.8
Fig.10 Fig.11
Tel:86-371-86533226
Choose language
Soft version and date of manufacture
Setting the time of back light
Set the date and the time
1. Move the cursor to set and press "
enter set interface, input four passwords, as
shown in Figure 8, the user can press "
move the cursor, input the password by ▲ ▼
key, sensor parameters as shown in Figure 9.
Fig.9
2. Gas parameters setting
Parameter settings include gas type, unit
select, high alarm and low alarm, range
settings. As an example with Ex, as shown in
Figure 10, use the ▲▼key to select the gas
type (Ex),press the
parameter settings, As shown in Figure 11,
use the▲▼key to modify the parameter, after
done, press the return.
If no special requirements, alarm value
parameters should not be modified.
Description
- 10 -
Email:
www.bosean.com
to enter Ex gas
sales03@bosean.com
" to
" to