Detector Menu Settings - Bosean Electronic Technology BH-4S User Manual

Bosean Electronic Technology Co.,Ltd
Fig.7
Note: the axis and the data is green, the data curve is blue, the
low alarm line is yellow, high alarm line is red.

4.4.2 Detector menu settings

In the normal detection mode, press "
then press ▲ ▼ key to select the setting of gas parameters,
calibration, calibration zero, language settings, information view,
back light settings, time setting function. These function menus
can be displayed cyclically and can be selected by cursor
movement.
The menu function is as follows:
Description
Return
Setting
Calibration
Zero
Tel:86-371-86533226
The abscissa X axis is the time,
the current record within 9s of
the curve
The vertical axis Y is the sensor
value, data of the sensor can be
seen from the Y axis
Press ▲ ▼ key to move the cursor to the
return function, press "
interface.
Four sensor parameters can be set, including
the gas type, unit selection, high alarm and low
alarm, range settings.
Can be calibrated for the sensors
Zero calibration
- 9 -
www.bosean.com
Description
" key to enter the menu,
Operation
" to return to the main
Email: sales03@bosean.com