Sharp PN-UH861 Setup Manual page 10

nConnecting antenna cable
Connect the antenna cable to the monitor using one of the methods in the illustration as shown ((1) or (2)).
(1) Cable without a CATV converter
Cable TV lead-In
(2) VHF/UHF antenna
75-ohm coaxial cable (round)
TIPS
• F-type connector should be finger-tightened only.
When connecting the RF cable to the monitor set, do not tighten F-type connector with tools.
If tools are used, it may cause damage to your monitor set.
(The breaking of internal circuit, etc.)
F-type connector
75-ohm coaxial cable
8
E
Home antenna terminal
To
(75-ohm)
antenna
terminal
Coaxial cable
(commercially available)
Home antenna terminal
(75-ohm)
To
antenna
terminal
Coaxial cable
(commercially available)