AEG FAVORIT 55030 User Manual page 27

Hide thumbs Also See for FAVORIT 55030:
Table of Contents

Advertisement

Available languages

Available languages

Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
3. Close the appliance door.
4. Turn the programme knob until the
marker on the knob is aligned with
the programme you want to set.
• The programme duration flashes in
the display.
• The phase indicators of the set
programme come on.
5. Press Start. The programme starts.
• Only the indicator of the phase in
operation stays on.
• The display shows the programme
duration that decreases with steps
of 1 minute.
Starting a programme with
delay start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
• The delay time flashes in the dis-
play.
3. Press Start. The countdown starts.
• The display shows the countdown
of the delay start that decreases
with steps of 1 hour.
• The phase indicators of the set
programme go off.
• When the countdown is completed,
the programme starts.
– The indicator of the phase in opera-
tion comes on.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
1. Press and hold Multitab and Delay
at the same time until:
• The programme duration flashes in
the display.
• The phase indicators come on.
2. Press Start. The programme starts.
Cancelling the programme
Press and hold Multitab and Delay at
the same time until:
• The programme duration flashes in
the display.
• The phase indicators come on.
Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.
At the end of the programme
When the programme is completed, the
phase indicators go off and the display
shows 0.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off
button, the Auto Off device au-
tomatically deactivates the appli-
ance after some minutes. This
helps to decrease the energy
consumption.
Let the dishes become cold be-
fore you remove them from the
appliance. Hot dishes can be
easily damaged.
First remove the items from the
lower basket, then from the up-
per basket.
There can be water on the sides
and on the door of the appli-
ance. Stainless steel becomes
cool more quickly than the
dishes.
ENGLISH
27

Advertisement

Table of Contents
loading

Table of Contents