Sony NSZ-GT1 Help Manual page 63

Did You Know
Home
Keypad
Search
Using Applications
Internet
TV
Playback
Connection
Connecting Devices
Preparing to Control Your
TV
Preparing to Control an AV
Receiver
Preparing to Control Other
Devices
Advanced Network
Connection
Settings
Parts & Controls
Troubleshooting / FAQ
Others
Media Remote
NSZ-GT1
Top Page > Connection > Preparing to Control Other Devices (cable/satellite box or tuner)
Preparing to Control Other Devices (cable/satellite box or
tuner)
When connecting the unit to other devices such as a cable/satellite box, you can control it using
the Keypad. The cable/satellite box is used as an example.
Connect an IR Blaster to the unit and place it properly on the cable/satellite box.
1.
Press Fn + 1 and select [Video input].
2.
Select [Add device manually], then follow the on-screen instructions.
3.
To change the input to cable/satellite box whenever either TV, GUIDE, DVR is
pressed
The input changes when those keys are pressed, only when you are not watching TV.
Press Fn + 1 and select [Video input].
1.
Select the cable/satellite box from the "Configured devices" list then select [Make default TV
2.
device].
To control the cable/satellite box
Point the Keypad to the unit and press either TV, GUIDE, DVR. Then, you can use the following
keys:
(BD/EXT): turns on/off the unit
INPUT: changes the input of your TV
VOL: changes the volume up (+) or down (-) of your TV
MUTING: silences the volume of your TV
GUIDE: displays the cable /satellite box's TV Guide
DVR: displays the cable /satellite box's video menu
Notes
If some keys do not work correctly, try to change the code. Press Fn + 1 and select [Video
input] and select the device, and then select [IR Blaster settings] - [Code] and change the
code. See Video Input.
Available keys depend on the device you are controlling.
Tip
Search Help Guide
FAQ
63