Download Print this page

Troubleshooting Checklist - Ice Qube Blade Series Operation And Installation

Advertisement

Contact Ice Qube if the air conditioning system should fail to operate satisfactorily during the first year of
operation. DO NOT remove the cover without first notifying the factory. Removal of the cover will
immediately void the warranty.
If an operating problem should occur, please review the items outlined in the following "Trouble Shooting
Check List". If the problem persists, obtain model and serial number before contacting Ice Qube for
technical assistance.
TROUBLE SHOOTING CHECK LIST
Model No:
Voltage Rating:
Is proper electrical power available at the outlet?
Is the power cord connected to the electrical supply?
Is the controller set point temperature above or below the enclosure
temperature?
Is the internal blower(s) operating?
Is the external blower(s) operating?
Is the enclosure door closed tightly?
Are all of the gaskets in place?
Has the unit been cleaned recently?
Is the system mounted level on the enclosure?
Is there adequate space within the enclosure for air flow?
Is there adequate space around the enclosure for air flow?
Have you recently added electronic equipment to the enclosure?
Make sure you have your model and serial number ready before you call.
8-15-REV1
TROUBLE SHOOTING:
S/N Number:
Amps:
Still experiencing problems?
Call Ice Qube at 1-888-867-8234
7
Phase:
Hz:
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO

Advertisement

loading