Bissell BARKBATH 1844 Series Quick Start Manual

QUICK START GUIDE
Assembly Instructions
1. Get ready to prime the system.
Fill the base unit clean water tank
with warm-to-the-touch tap water
to the fill line.
6. Align screw cap with tabs of
reservoir opening and twist shut.
161-1033 01/17
TM
2. Before connecting the bathing 3. Turn machine ON and press the
tool, place the unit on a high, flat flex hose trigger for 15-20 seconds
surface and extend the hose to a to allow water to dispense on a
microfiber mat or towel on floor. microfiber mat or towel.
7. Hold the tool horizontally on a flat surface (such as table or counter
top) and attach it to the cleaner by inserting the flex hose connector into
the shampoo tool connector. You will hear a "click" when it locks in place.
Refer to the enclosed user guide for complete
instructions and important safety notices.
4. Locate the bathing tool and 5. Hold tool right side up and add
twist cap on the shampoo tank BISSELL No-Rinse Dog Shampoo
counter-clockwise to open. to the shampoo reservoir.
8. Set Rinse/Shampoo switch to 9. With the base unit and reservoir
desired setting. For Shampoo, the on a table, extend the hose and
reservoir will dispense a mixture nozzle to the mat or towel on
of shampoo and water; for Rinse, floor and spray trigger for 15-20
it will dispense just water. seconds until solution dispenses.
1844, 1842 SERIES
WARNING