Advertisement
Connection Diagram
Device Configuration
1. To configure the device, go to Start ®
the home page of Xtend Voice Logger browser interface.
2. Enter Username as "admin" and Password as "admin", click Login.
3. User will be prompted to configure the device, click OK to proceed.
4. On the "Configure Devices" screen, click OK to continue with the default configuration.
5. Live Calls screen appear and the device status LED turns green and stops blinking.
6. Status of all incoming/outgoing calls will be displayed in the Live Calls menu of browser
interface. This indicates that the Voice Logger configuration is completed and the device is
working correctly.
Important:
The LED on the front-side of device turns green and red blinking when the
ISDN PRI/EPABX line is disconnected from the RJ 45 port or the ISDN PRI line/EPABX
is not working properly.
Note: Detailed installation and user
manuals are available as PDF files in the
product CD.
Programs
Xtend Voice Logger. Click Login to open
®
Minimum System Requirements
Operating System (32/64-bit) : Windows 2008/2012/Vista/7/8/8.1/10
Browser : Internet Explorer 6.0 or above
Processor Speed : Dual Core or higher
Memory : 2 GB or above
Hard Disk Space : 500 MB for software installation
Note: The specification mentioned here is for recording a single port and this shall
vary with the increase in number of ports.
Xtend Voice Logger
ISDN PRI Line
EPABX
1 GB approx. for 175 hrs of recording
54346-03
Advertisement
