Table of Contents
Advertisement
5. To
delete the photo
return to Capture mode
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
•
Record video: switch to Record mode.
•
Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode.
Multi shot: take a series of action stills. You can
select the number of still images the camera will
take.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
•
Effects: change the colour tone or apply a special
effect to the photo.
•
Frames: apply a decorative frame to the photo.
Press
<Delete> and then
<Yes>.
[
].
p. 75
•
Flash: set the flash setting.
•
Timer: set a time delay before the camera takes a
photo.
•
Go to Photos: go to the Photos folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Photo quality: select an image quality setting.
View finder: select a preview mode, either Full
screen mode or Standard ratio mode with actual
ratio.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
lower the ISO number to increase the quality.
The higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
73
Advertisement
Table of Contents
