Table of Contents
Advertisement
•
Block list: specify e-mail addresses from which
messages will not be accepted. You can also
specify message subjects that you will not accept.
•
Email account: set up your e-mail account(s) and
select the one to be used:
Current account: select an account to be used for
e-mails.
Account settings: configure up to five e-mail
accounts using different e-mail servers.
The following options are available for each
account:
- In use: select this option to use the account and
to display the account in the E-mail box.
- Account name: enter a name for the currently
selected account.
- User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
- Email address: enter your e-mail address.
- Reply address: enter the e-mail address to
which you want recipients to send reply
messages.
- User ID: enter your e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- Include attachments: select this option to
receive attachments with e-mails.
63
Advertisement
Table of Contents
