Using Your Lumin Bullet - 3B Medical LM4000 User Manual

Using your Lumin BULLET

1. Charge Lumin BULLET by plugging in USB cord to bottom of
BULLET.
2. The BULLET will glow RED while charging, and GREEN when
fully charged.
3. Remove BULLET and place inside CPAP tubing so there is
enough tubing hanging over to pull the tubing.
4. Place BULLET in shell, you will feel the magnets grab the
BULLET.
5. Close shell and slide clasp until the shell locks, your BULLET is
now activated.
6. Pull the tubing all the way to the right, then back to the left,
ensuring you cover the entire length of tubing twice, this process
should take 30-60 seconds for optimal disinfection.
7. Remove hose from BULLET, it is now ready to use.
8