Advertisement
Frequently Asked Questions
How does Lumin BULLET work?
Lumin works by emitting high energy light within a narrow spectrum
referred to as UV-C. The Lumin relies on a lhigh powered germicidal
UVC-LED designed to produce the highest amounts of UV energy –
where 90% of energy is generated around 254nm. This light is very
close to the peak of the germicidal effectiveness curve of 265nm,
the most lethal wave to microorganisms. The dose of UV-C emitted
in one 1 minute cycle is sufficient to kill most bacteria and mold on
a surface. The use of UV-C is environmentally friendly, leaves no
residue or toxic gases or chemicals. UV-C systems are currently in
use to disinfect operating rooms, ambulances, emergency service
vehicles and other high touch areas.
Why doesn't the Lumin use Ozone, like other CPAP cleaners?
Because 3B Medical is a manufacturer of CPAP equipment, masks
and accessories, we have a heightened level of commitment and
concern for our patients. We did not feel that the safety concerns of
ozone being used in the home were being adequately disclosed. Due
to the lifestyles of many of our patients, we also had concerns that
the two hour wait period in using CPAP equipment might be ignored
and harmful OZONE inhaled. The U.S. EPA published a serious
warning about use of ozone in a home environment:
"When inhaled, ozone can damage the lungs. Relatively low
amounts can cause chest pain, coughing, shortness of breath
and throat irritation. Ozone may also worsen chronic respiratory
diseases such as asthma and compromise the ability of the body
to fight respiratory infections."
https://www.epa.gov/indoor-air-quality-iaq/ozone-generators-are-sold-air-cleaners
For that reason, in designing the Lumin BULLET, care was taken to
find the safest and fastest way to disinfect CPAP accessories. UV-C
was by far the best solution.
10
Hide quick links:
Advertisement
