Go To Functions - Nokia 7088 User Manual

N7088_EN_RUIM_for MEA_clean_021207.fm Page 13 Monday, February 12, 2007 11:20 AM
The PIN code option is in the
the Security option, you must enter a PIN code. The default PIN code
may vary depending on your wireless service provider who provided your
UIM card.
The PIN code protects the UIM card from unauthorized access. The PIN
code can be 4–8 digits in length. After three successive incorrect entries,
the PIN code is blocked. You need to enter the personal unblocking key
(PUK) code. See "Personal unblocking key (PUK) code" p. 70.

■ Go to functions

The Go to menu enables you to change the function of the right
selection key on your device. With this function, you can quickly access
your most frequently used functions from the
mode.
Choose Go to functions
1. In the standby mode, select
2. Scroll up or down to highlight the desired function.
3. Select Mark to add a function or
4. Select Done when you have added all desired functions.
5. Select Yes to save the changes.
6. In the standby mode, select
you selected in step 3.
Organize functions
1. In the standby mode, select
2. Scroll up or down to highlight the function you want to rearrange,
and select Move >
bottom.
3. Select Done > Yes
D e v i c e a t a g l a n c e
Settings menu. The first time you access
Go to
Go to > Options > Select
Unmark to remove a function.
Go to to display a list of the functions
Go to > Options > Organise.
Move up, Move down, Move to
to save the changes.
menu in the standby
options.
top, or Move to
13