Kohler Clearflo K-7147 Installation Manual page 5

3. Install Overflow Elbow
- Remove the O rings and lubricant from the package. Apply
lubricant to the O rings.
- Assemble the O rings into the grooves of the overflow elbow.
- Apply more lubricant to the O rings and overflow elbow.
- Insert the overflow elbow into the overflow tube.
- Attach the black gasket to the overflow elbow. Make sure the small
tapered end of the gasket is at the top.
- Apply a ring of plumbers putty or other sealant according to the
manufacturer's instructions to the front side of the tapered gasket
(putty will be between the gasket and the bath).
- Align the overflow elbow with the overflow hole in the bath. Tighten
all coupling nuts on the tee to secure the assembly.
- Apply thread sealant tape to the tailpiece threads.
- Thread the tailpiece onto the tee and tighten securely.
- Make sure the tailpiece on the drain fits properly into the trap. The
tailpiece may need to be cut for proper fit. 1" (2.5cm) to 2" (5cm) of
the tailpiece should fit inside the trap.
Kohler Co.
Black Gasket
(tapered end)
Overflow
Elbow
Overflow
Tube
5
A
1018154-2-