York OPTIVIEW Operation Manual page 40

SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
• V2 (Current)
• Z2 (Current)
• V4 (Current)
• W4 (Current)
[MBC Status] AVR (LED)
Indicates the MBC is reporting its automatic vibration
reduction feature is active via Modbus Data.
[MBC Status] ABS (LED)
Indicates the MBC is reporting its automatic balancing
system feature is active via Modbus Data.
Motor Speed
Indicates the compressor motor rotational speed.
DC Bus Voltage
Indicates the voltage of the DC Bus, which supplies
the MBC.
MBC Operation Time
Indicates the cumulative time of operation of the MBC
since initial power up.
MBC Rotation Time
Indicates the cumulative time the MBC was in rotation
state since initial power up.
MBC Amplifier Temp
Displays the temperature measured at the MBC bear-
ing current amplifier board.
MBC Converter Temp
Displays the temperature measured at the MBC DC-
DC converter board.
40
PROGRAMMABLE
There are no programmable fields on this screen.
NAVIGATION
Home
Causes immediate return to the Home Screen.
Compressor
Causes immediate transfer to the Compressor Screen.
MBC
Causes immediate return to the MBC Screen.
FORM 160.78-O2
ISSUE DATE: 5/22/2017
JOHNSON CONTROLS