Wolf VACUUM SEAL DRAWER Installation Manual page 2

VA CU UM S E A L D R AW E R
Contents
Vacuum Seal Drawer
2
Specifications
3
Installation
6
Troubleshooting
7
Features and specifications are subject to change at any
time without notice. Visit wolfappliance.com/specs for the
most up-to-date information.
Important Note
To ensure this product is installed and operated as safely
and efficiently as possible, take note of the following types
of highlighted information throughout this guide:
highlights information that is especially
IMPORTANT NOTE
important.
indicates a situation where minor injury or product
CAUTION
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specified.
IMPORTANT NOTE: Save these instructions for the local
electrical inspector.
SAVE THESE INSTRUCTIONS
|
2 Wolf Customer Care 800.222.7820
Product Information
Important product information, including the model and
serial number, are listed on the product rating plate. The
rating plate is located on the left side of the drawer. The
drawer must be open and the lid lifted to view the rating
plate. Refer to the illustration below.
If service is necessary, contact Wolf Factory Certified
Service with the model and serial number. For the name of
the nearest Wolf Factory Certified Service or for questions
regarding the installation, visit the contact and support
section of our website, wolfappliance.com, or call Wolf
Customer Care at 800-222-7820.
RATING
PLATE
Rating plate location