Advertisement
Quick Start Guide
1-
Fully Charge batteries to 100%.
2-
Download MW Connect® from Apple App Store or Google Play Store and
follow MW Connect directions on next page to pair your mobile device to
the sock batteries.
3-
Place socks on your feet.
4-
Press and hold the power button on the battery for a few seconds. Once
it's powered on LED will be Green/100% heat. Repeat for each battery.
5-
Locate wire harness in battery stash pocket on inside of sock cuff (see
drawing).
6-
Connect wire harness to battery and slide battery(s) in pocket (See
drawing).
7-
Now that the batteries are connected to the socks and powered on;
Launch MW Connect on your Mobile Device to adjust heat settings.
8-
To power off Socks, press and hold the power button on each battery until
light turns off. If you plan to not use socks for more than a few days, unplug
both batteries from the socks.
WWW.MOBILEWARMING.COM
Do not use battery if you notice a
change of shape (lumps),
over-heating when charging or if
rust or corrosion on the battery
connectors is found.
Battery Installation
3.7volt Performance Sock Heat Ratings
100%
75%
50%
135°F
120°F
105°F
(57.2°C)
(48.8°C)
(40.5°C)
2.5Hrs.
3Hrs.
5Hrs.
Power Ratings Based on Fully Charged Battery and Ambient Temperature of 72
Use only
5
6
MW37V22
Battery
25%
90°F
(32.3°C)
10Hrs.
°
Advertisement
