Buttons For Adjusting The Temperature; Temperature Display - AEG SANTO Series Operating Instructions Manual

Hide thumbs Also See for SANTO Series:

Table of Contents

Buttons for Adjusting the Temperature

• The temperature display is switched over from the display of the

ACTUAL temperature (Temperature display is illuminated) to the

display of the DESIRED temperature (Temperature display flashes) by

pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).

• Each time one of the two buttons is pressed again the DESIRED tem-

perature is adjusted by 1 °C.

• If neither button is pressed, the temperature display automatically

switches back after a short period (approx. 5 sec.) to the display of

the ACTUAL temperature.

DESIRED temperature means:

The temperature that is required in the refrigerator, this can be

adjusted to the temperatures shown in the display. The DESIRED

temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently

present in the refrigerator. The ACTUAL temperature is indicated with

illuminated numbers.

• During normal operation, the temperature currently present in the

middle section of the refrigerator (ACTUAL temperature) is displayed.

• When the temperature is being adjusted a flashing display indicates

the fridge compartment temperature currently set (DESIRED temper-

ature).

• If there is a fault in the appliance the temperature display shows a

square or a letter.

818 36 92-01/4

The temperature is adjusted using the „+" (WARMER) and

„-" (COLDER) buttons.

These buttons are connected to the temperature display.

The temperature display can indicate several pieces of

information.

Appliance Description

Table of Contents