Before Use; Using The Fridge; To Start The Fridge And Set The Correct Temperature - AEG S70322-KG1 Operating Instructions Manual

H. FAST FREEZE button
Used to switch the Fast Freeze
feature on and off.
I. Temperature display
Shows the highest temperature
inside the freezer.
J. Temperature adjustment

BEFORE USE

Check that the drain hose at the rear
of the cabinet discharges into the
drip tray.
Position and clean the cabinet as
explained in the section
"Installation".
Before inserting the power plug into the outlet and switching on the cabinet
for the first time, leave it standing upright for about 2 hours. Otherwise the
compressor may sustain damage. This time will allow the oil sufficient time
to return to the compressor.

Using the fridge

To start the fridge and set
the correct temperature
Switching on:
Switch on the fridge by pressing the
power switch.
Setting the temperature
Press the buttons until the desired
temperature flashes in the
temperature display (The
temperature can be set between +2°C
and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
Allow the cabinet to run for a period of 24 hours whenever the temperature
setting is changed. This will allow the temperature to stabilise inside the
cabinet.
button/thermostatUsed to set the
temperature in the freezer.
K. Alarm shut-off button
Used to turn the audible alarm off.
L. Red warning lamp
Flashes when one of the alarms in
the cabinet has been triggered.
5
AEG/Electrolux 8184235-00/3
6