Table of Contents
Advertisement
1
1
1
4
4
4
8
8
8
12
12
11
8
8
10
2
2
2
5
6
5
6
5
6
9
10
9
9
10
13
13
1
2
3
3
3
7b
7b
7b
7a
7a
7a
11
1
0
11
English
English
English
GE TTIN G TH E BE S T RE SU L TS
GE TTIN G TH E BE S T RE SU L TS
Hard floors:
Use the carpet/hard floor nozzle with the left pedal
in position (1).
Hard floors:
Use the carpet/hard floor nozzle with the left pedal
Carpets:
Use the carpet/hard floor nozzle with the left pedal in
in position (1).
position (2).
Carpets:
Use the carpet/hard floor nozzle with the left pedal in
Reduce suction power for small carpets.
position (2).
If you have a carpet/hard floor nozzle with two pedals – press
Reduce suction power for small carpets.
the pedal on the right (3) to vacuum up animal hair, etc. more
If you have a carpet/hard floor nozzle with two pedals – press
effectively.
the pedal on the right (3) to vacuum up animal hair, etc. more
Upholstered furniture:
Use the combination nozzle as shown in
effectively.
(4).
Upholstered furniture:
Use the combination nozzle as shown in
Curtains, lightweight fabrics, etc.:
Use the combination nozzle as
(4).
shown in (4). Reduce suction power if necessary.
Curtains, lightweight fabrics, etc.:
Use the combination nozzle as
Frames, bookshelves, etc.:
Use the combination nozzle as
shown in (4). Reduce suction power if necessary.
shown in (5) or feather duster (6 – certain models only).
Frames, bookshelves, etc.:
Use the combination nozzle as
Crevices, corners, etc.:
Use the crevice nozzle (7b).
shown in (5) or feather duster (6 – certain models only).
On certain models, the crevice nozzle can be extended (7a).
Crevices, corners, etc.:
Use the crevice nozzle (7b).
Extend the crevice nozzle using a finger to push out the extend-
On certain models, the crevice nozzle can be extended (7a).
ing section. When the extending section is in its outermost posi-
Extend the crevice nozzle using a finger to push out the extend-
tion, a retaining button locks it in position. Press this retaining
ing section. When the extending section is in its outermost posi-
button and push the crevice nozzle together before placing it
tion, a retaining button locks it in position. Press this retaining
back in the accessory holder.
button and push the crevice nozzle together before placing it
back in the accessory holder.
Using the power nozzle (certain models only)
8
Attach the nozzle to the tube.
Using the power nozzle (certain models only)
9
Connect the power nozzle to the socket on the vacuum
8
Attach the nozzle to the tube.
cleaner.
9
Connect the power nozzle to the socket on the vacuum
10
Use the clips to secure the cable along the tubes and hose.
cleaner.
11
The power nozzle starts operating when the vacuum cleaner
10
Use the clips to secure the cable along the tubes and hose.
is switched on.
11
The power nozzle starts operating when the vacuum cleaner
is switched on.
Using the turbo nozzle (certain models only)
12
Attach the nozzle to the tube.
Using the turbo nozzle (certain models only)
13
Adjust the suction power by opening or closing the air vent.
12
Attach the nozzle to the tube.
13
Adjust the suction power by opening or closing the air vent.
Note: Do not use the power or turbo nozzle on skin rugs, rugs with
long fringes or a pile depth exceeding 15 mm. To avoid damaging the
Note: Do not use the power or turbo nozzle on skin rugs, rugs with
carpet, do not keep the nozzle stationary whilst the brush is rotating.
long fringes or a pile depth exceeding 15 mm. To avoid damaging the
Do not pass the nozzle across electric cables, and be sure to switch off
carpet, do not keep the nozzle stationary whilst the brush is rotating.
the vacuum cleaner immediately after use.
Do not pass the nozzle across electric cables, and be sure to switch off
the vacuum cleaner immediately after use.
Hide quick links:
Advertisement
Table of Contents
