KUDOS Titan 606 Instruction Manual

Please read through these instructions before using your new loudspeakers.
The Titan 606 loudspeakers can be either passively or actively driven. In a passive system
the output from a power amplifier is passed through the crossover housed inside the
loudspeakers. Titan 606 loudspeakers are configured from the factory for passive operation.
To maintain correct phase make sure to connect the "red +" amplifier connection to the
corresponding "red +" Passive Input speaker connection and the "black -" amplifier
connection to the corresponding "black -" Passive Input speaker connection.
If you wish to use your Titan 606 loudspeakers in an active configuration you will need one
amplifier channel for each drive unit in the speakers and a suitable, Kudos Approved, active
crossover. Incorrect connection may result in serious damage to your loudspeakers. For
further information contact your dealer / distributor.
Loudspeaker cables can have a significant effect on the overall sound quality. Ask your
dealer or seek advice from the manufacturer of your amplifier on suitable
The Titan 606 loudspeakers come with a stabilising and port optimising plinth fitted and the
supplied spikes should be used at all times. If you have a wooden or laminate floor your
dealer should be able to supply floor protectors to avoid spike damage to your floor.
The Titan 606 loudspeakers should be easy to site in your listening room. As a
general guide, they should be placed approximately 2m apart and at least the same distance
away from the main listening position. The Titan 606's are ported through the base of the
cabinet onto the plinth which reduces the effects of room boundaries.
However, in most circumstances, we would recommend the cabinets are placed at least
45cm away from corners. Moving a loudspeaker closer to room boundaries will increase bass
response, but may cause colouration and unevenness in the
mid-band. All loudspeakers require a "running-in" period and we recommend you do not
decide on the final positioning until your 'speakers have had at least 30 hours of use. Once
you have become more familiar with your new loudspeakers, a degree of experimentation
with their placement can bring about significant improvements.
Titan 606 Instruction Manual
Thank you for choosing Kudos.

Connections

cables for your system.
If in any doubt consult your supplying dealer.

Positioning