Advertisement
Available languages
Available languages
PROBE USE
Response time and accuracy will be improved by gently
waving the probe from side to side to create air flow across
the RH sensor.
Moving the probe from cold locations to warm humid
locations may cause condensation to form on the sensor. If
this occurs allow time for the sensor to dry out or you may
get false readings.
BACKLIGHT
Press and hold
DISPLAY
MULTIFUNCTION
TIME LOG
HH:MM
BATTERY
DISPLAY HOLD
Pressing
appear on the display. Press
normal display.
ADVANCED FUNCTIONS
Model 2080R only
ADDITIONAL TEMPERATURE PROBE
The instrument has a socket to allow measurements using a
type K Thermocouple probe (suggested Digitron Part No.
K0234). To use this function, check suitability of temperature
probe for the measurement to be taken and then connect the
probe via the socket on top of the instrument.
MEASUREMENT
Pressing the
1.
RH reading.
3.
Dewpoint reading.
("I"
will appear in the top right corner of the display). (2020R
only).
5.
External temperature probe reading (2080R only).
Note: °C and °F can be selected by holding down the
key while switching on. Repeat process in order to switch
between °C and °F.
ON
key.
NUMERIC
ENTRY
NE
OK?
YES
HUMIDITY
DEWPOINT
key freezes the display. The
unit key scrolls through the following units:
2.
Internal temperature probe reading.
4.
Ice point (or frost point) reading.
MULTIFUNCTION
RANGE
A/R
° ° C F
PROBE
RELATIVE
key again to return to
CELSIUS/
FAHRENHEIT
ENTER
probe
%
dewpoint
air
symbol will
ICE
POINT
% RH
AIR
Advertisement
