Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Cherry G83A
- Page 1 TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 Original Instructions G83A Lockbolt Power Tool 1224 E. Warner Ave, Santa Ana, Ca 92705 Tel: 1-714-545-5511 Fax: 1-714-850-6093 www.cherryaerospace.com...
-
Page 2: Table Of Contents
Description ......................................3 Specifications ..................................... 3 Safety Warnings ....................................3 Putting the tool in service .................................. 4 How to Use the G83A ..................................4 Maintenance and Repair ................................... 5 Fill and Bleed Instructions ................................. 5 Troubleshooting Guide ..................................6 Service Procedure ....................................6 Air Valve ..................................... -
Page 3: Description
Federal Identification Code: 11815 DESCRIPTION The Cherry® G83A Lockbolt® riveter is a compact but powerful production tool designed for high productivity, reliable installation of the most popular sizes of aircraft lockbolts and blind bolts. This powerful tool has many ergonomic features: light weight (4.95 Lbs. -
Page 4: Putting The Tool In Service
MUST be connected to a dedicated, regulated airline. may be attached to any shop airline. HOW TO USE THE G83A LOCKBOLT INSTALLATION After selecting the proper pulling head, attach it securely to the riveter and connect the air-line to the tool. -
Page 5: Maintenance And Repair
2. Use clean and dry air to prevent premature wear and clogging of the air components. 3. Inspect the riveter for fluid leaks routinely Use automatic transmission fluid (ATF) type “A” (no substitutes). Cherry® Aerospace recommends using, Dexron® III ATF. FIRE Suitable extinguishing media: CO2, dry powder, foam or water fog. -
Page 6: Troubleshooting Guide
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 TROUBLESHOOTING GUIDE Make sure the riveter is connected to an air source No air supply is connected Remove and replace trigger assembly. Faulty trigger (28) Piston (6) does not move Faulty power piston( 50-52) Service the Handle Subassembly (25). after depressing Trigger Service the Air Valve; make sure the Sprint is ... -
Page 7: Service Procedure
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 SERVICE PROCEDURE Caution: Maintenance and repair to be conducted only by trained personnel. Prior to attempting any repair or maintenance work, make sure the air is disconnected. -
Page 8: Cross Section Drawing
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 CROSS SECTION... -
Page 9: Part List
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 PART LIST Model No: G83A Item Description Item P/N Description 700‐264 Head Cylinder Sub‐Assembly 700‐268 Handle Sub‐Assembly 700‐211 Bayonette Adaptor Assy P428 Set Screw P828 O‐Ring 703A33 Trigger Sub‐Assy P883 Back‐up Ring 530A38 Trigger ... -
Page 10: Exploded View
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 E X P L O D E D V I E W O F G 8 3 A... -
Page 11: Pulling Heads
TM-G83A © 2014 Cherry Aerospace Rev.: B DCR# 14-1093 DATE: 11/11/14 Federal Identification Code: 11815 PULLING HEADS Pulling heads are not furnished with the riveter and must be ordered separately. All Huck nose assemblies suitable for the 352 and 230 style tools will fit directly on this tool LOCKBOLT TOOL SELECTION CHART... -
Page 12: Declaration Of Conformity
Machine Directive 2006/42/EC Hereby declare under our sole responsibility that: Equipment: Pneumatic Hydraulic Hand Riveter Model Number: G83A Serial Number: _____________________ Is in conformity with the applicable requirements of the following standards: EN ISO 12100:2010 Safety of Machinery; General Principles; Risk Assessment and Reduction ISO/TR 14121-1&2:2007...