Aux In Mode; Fm Radio Mode - QFX BT-600 Product Manual

Note: Once connected, sound can be controlled using either the speaker or
the relevant controls on the Bluetooth compatible device.
2. USB/ TF card Mode
1 To use TF mode, insert a TF card (not included) into the TF card slot on
the back of the speaker. The speaker will automatically change to TF mode.
2 To use USB mode, insert a compatible USB drive into the USB port on the
back of speaker. The speaker will automatically change to USB mode.
3 To add or minus the volume by pressing the"+" button and "-"button
without moving your finger away.
4 To switch the next song by pressing the button "+ "and last song by the
" - " button shortly.
Note: If the speaker does not automatically change to TF or USB mode, press "M"
until the desired operation is selected.
3 . Hand free Mode
1 To make sure your mobile phone and the speaker is connected.
2 When there is calls get in, please press" "to answer the call.
3 When you want to hand up the phone, press "
" again.

4. Aux in Mode

Connect one end of the line in Aux port on the speaker and the other end to
a MP3 player or other compatible audio source.
The speaker will automatically switch to Aux mode once the aux cable has
been inserted.
To change different functions, press the button"M".

5. FM radio Mode

Connect the micro 5 pin end of the supplied USB charging cable to unit and
the cable will work as external antenna. Press the button " " into
FM radio function.
To scan the FM frequency, press " button.
"
Note: Remove the USB/TF card while using the FM radio function.
6. To charge