Zte ZXSDR RSUC User Manual page 26

Radio system unit of cdma with 1t2r
Hide thumbs Also See for ZXSDR RSUC:
Table of Contents

Advertisement

ZXSDR RSUC User Manual
20
Confidential and Proprietary Information of ZTE CORPORATION
Name
emissions and radiated
spurious emissions
Radio frequency Front
End SWR
Table 8
illustrates the 1.9 GHz receiver indices.
T
8 1.9 GH
R
ABLE
Z
ECEIVER
Name
Operating band
Receiver sensitivity
Receiver dynamic range
Noise figure
Adjacent channel
selection (ACS)
Single tone desensitiza-
tion
Intermodulation
spurious response
attenuation
Conducted spurious
emissions and radiated
spurious emissions
Radio frequency Front
End SWR
Index
receive band
< -60 dBm, measured within the BTS
transmit band
< 2.0
I
NDICES
Index
1.9G Hz (Band Class 1&14)
< -115 dBm
When the lower limit is the receiver
sensitivity and the upper limit (noise level)
equals - 55 dBm/1.23 MHz (Eb/N0 =
10dB±1dB), the Frame Error Rate (FER) is
lower than 1%.
< 3
Band Class 6:> - 53dBm (± 2.5M)
In the presence of a single tone that is
50 dB above the CDMA signal level, and
is at offset of ± 750 kHz from the center
frequency, the output power of the MS
increases by no more than 3 dB ,and the
FER is less than 1.5%.
In the presence of a single tone that is
75 dB above the CDMA signal level, and
is at offset of ± 900 kHz from the center
frequency, the output power of the MS
increases by no more than 3 dB, and the
FER is less than 1.5%.
In the presence of two interfering tones
that are 60 dB above the CDMA signal level,
and are at offsets of 1.25 MHz and 2.05
MHz, and -1.25 MHz and -2.05 MHz from
the center frequency, the output power of
the MS increases by no more than 3 dB,
and the FER is less than 1.5%.
< -80 dBm, measured within the BTS
receive band
< -60 dBm, measured within the BTS
transmit band
< 2.0

Advertisement

Table of Contents
loading

Table of Contents