Advertisement
PLEASE READ THESE ESSENTIAL INSTRUCTIONS
YOUR VACUUM CLEANER is designed, developed and
rigorously tested to function efficiently and safely when
properly maintained and used in accordance with the
following instructions. These instructions have been pre-
pared with safety and efficiency paramount.
The MACHINE OPERATOR must be trained by a suitably
qualified instructor, and be made aware of the relevant
regulations and legislation currently in force at the time of
use.
CAUTION - This machine MUST NOT be used in explosi-
ve or inflammable atmospheres or where such atmosphe-
res are likely to be produced by the presence of volatile
liquid or inflammable gas or vapour.
CAUTION - In no circumstances should the power supply
cord be wrapped around fingers or any part of the opera-
tors person.
8
(Only applicable to UK)
CAUTION - The electrical supply plug must not be subjected
to undue stress by pulling on the power supply cord.
Your MACHINE must only be connected to an electrical
supply of the same voltage and frequency as indicated on the
rating plate. Ensure that the plug fitted to the end of the power
supply cord is suitable for your supply socket, if not refer to the
information contained in 'Electrical Connections', or consult a
qualified electrician. The electrical installation from which the
supply is drawn must be maintained to current Institute of
Electrical Engineers wiring regulations.
REGULAR SERVICING and INSPECTION of your machine
must be carried out by suitably qualified personnel in accor-
dance with relevant legislation and regulations. In particular,
electrical tests for earth continuity, insulation resistance, and
condition of the flexible cord should be checked frequently. In
the event of any defect the machine MUST be withdrawn from
service, completely checked and repaired.
Trained Service Engineers will be pleased to carry out on site
servicing on a regular or as requested basis, to ensure the
continuing safety and efficiency of your machine.
Advertisement
