Table of Contents
Advertisement
3 Features
Main Parts
• HMI
• 512 kByte Flash EPROM
• 128 kByte SRAM
• 1 kbytes E2PROM emulated in a 8Kbytes Flash sector
• 1 RS232 serial Line
• 1 CAN BUS serial line (not optocoupled)
• Digital Inputs to be connected to a free contact
• Antenna with magnetic base, 5m coaxial cable, SMA right angle connector
• 1 GSM dual band AT modem with rechargeable LI-ION battery.
Optionally a GSM/GPRS dual band AT modem could be mounted
Power Supply: wide range voltage (100 ÷ 240 VAC)
o 2 x 7-segment LED display
o 1 push button
o 1 Service hours rotary switch with 10 positions
o status LEDs
o 1 x CAN address dip switch
Air Contact Hardware Manual
6
Advertisement
Table of Contents
