Table of Contents
Advertisement
Menu functions
Email retrieval server type: select the
protocol for the incoming e-mail server.
The remaining options depend on the
protocol type setting.
POP3 server/IMAP4 server: enter the
IP address or domain name of the POP3
or IMAP4 server.
POP3 port/IMAP4 port: enter the POP
or IMAP4 port number.
Use SSL: use the SSL (Secure Sockets
Layer) protocol for accessing the POP3 or
IMAP4 server.
IMAP4 retrieval option (IMAP4
protocol only): set whether the phone
retrieves only new messages or all
messages.
Keep on server: leave copies of e-mails
in the server after retrieving.
My address: enter your e-mail address.
User name: enter the user name for
POP3 or IMAP4 server connection.
Password: enter the password for POP3
or IMAP4 server connection.
68
Use POP before SMTP
authentication: (POP3 protocol only)
connect to the POP3 server before
connecting to the SMTP server to send
e-mails.
Use SMTP authentication: enable
SMTP authentication, which requires the
user to log in before sending e-mails.
Same as POP3/IMAP4: select if you
want the SMTP server to have the same
parameters as the POP3 or IMAP4 server.
User name: enter the user name for
SMTP server connection.
Password: enter the password for SMTP
server connection.
Voicemail
(Menu 5.0.4)
Use this menu to set the number of your
voicemail server.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
Advertisement
Table of Contents
