Wireless Transmitter Set-Up - Pyramat S2500-W Owner's Manual

WIRELESS TRANSMITTER SET-UP

1
Remove the casing and insert
2 AAA batteries (batteries not
included).
4
Twist the volume knob on
the control panel to click on the
power.
2
Turn the power switch on the
front of the transmitter to the "on"
position
5
Turn the source knob on the
control panel to W.
3
Press the channel button to
select the desired transmitter
channel. Eight channels are
available for the best quality
reception. If you experience
static or poor reception, try
another channel.
1 5
2 6
3 7
4 8
6
Select the same channel as the
transmitter on the Sound Rocker's
control panel by pressing the chan-
nel button. Example: 1–1, 2–2
or 3–3. To add multiple Sound
Rockers, simply select the same
channel on each rocker.
Note: Both the transmitter and
control panel must be on the same
channel to hear sound.
4
WARNING:
Do not
mix old and new batteries. Do not
mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium)
batteries.