Table of Contents
Advertisement
Tornado Customer Reference Guide
TM0410-1800, Rev 2A
January 2006
Chapter 7 – Keypad Service Provisioning
To set the active NAM
You can set witch NAM to be activated. If the current active NAM is locked, you must unlock it before
you set the other NAM to be active.
To lock/unlock the active NAM
The phone will reboot when exiting the System Menu if the preferred or active NAM has been
changed.
Test Screen
This menu will display some system parameters such as Rx Power, Tx Power, Pilot Pn, EC/IO, etc.
While the test screen is active, you can dial a number and end a call through the keypad. When in a
call, the test screen will be taken to the front to show the parameters.
Factory test mode
This is also a hidden menu. Enter menu by pressing "#*0203".
Note: You can quit 'Keypad' test by pressing right soft key twice.
VIA Telecom, Inc. Proprietary
7-
3
Advertisement
Table of Contents
