Table of Contents
Advertisement
Tornado Customer Reference Guide
TM0410-1800, Rev 2A
January 2006
Chapter 7 – Keypad Service Provisioning
If you want to change the MIN Lock setting, you must input SPC3 firstly.
The SPC3 is "333333" as default.
To program NAM 2
Select "NAM 2". The program procedure is almost the same as for NAM 1.
To change SPCs
Select SPC
You can change SPC1 or SPC2 and set the max tries of SPC1 or SPC2.
The phone will reboot when you exit the Service Program Menu.
Abbrev.NAM
You can program with the active NAM. The following parameters can be changed: MIN, MDN, Home
SID, Primary CH A and Secondary CH A.
The phone will reboot if you changed any parameters.
System NAM Setting
To select preferred
Select the preferred for the active NAM.
7-2
VIA Telecom, Inc. Proprietary
Advertisement
Table of Contents
