Table of Contents
Advertisement
W
i
F
i
V
o
I
P
P
h
o
n
W
i
F
i
V
o
I
P
P
h
o
n
2. Fix NAT setup
This is menu for setup of NAT Port Forwarding Function. NAT server address, NAT SIP
Port, and NAT RTP Port can be setup.
[Using Method]
[Menu]
setup]
4.1.4.5 CODEC
Following are voice CODEC which can be used with AVP-2000B.
- G.711 a/u law, G.723.1, G.726, G.729a
Among the above, AVP-2000B can support another CODEC except G.711 a/u law.
At the same time, two kinds of CODEC can be supported.
So, user can do setup the kinds of CODEC to use. This menu has following selections.
- G.711 a/u law
- G.711 a/u law + G.723.1
- G.711 a/u law + G.729
- G.711 a/u law + G.726
[Using Method]
[Menu]
[4:Administrator setup]
4.1.4.6 Initialization
This menu is to initialize the variables which are setup in AVP-2000B or to remove the
registration of SIP registration server normally.
1) Rebooting
This menu is enabling user to start AVP-2000B again.
[Using Method]
[Menu]
[4:Administrator setup]
2) Variables Initialization
This menu is enabling user to change all setup figures in AVP-2000B to initial setup
figures.
If initialization is carried out by this menu, all figures, such as bell sound, contrast, backlight
setup, password and etc, which were setup in AVP-2000B, are initialized.
e
e
[4:Administrator setup]
[NAT server address]
[3:NAT setup]
[NAT SIP Port]
[NAT RTP Port] Input
[2:CODEC setup]
[6:Initialization setup]
21
[1:NAT setup
[1:Fix NAT
[3:G.711 + G.729]
[1:Rebooting]
Advertisement
Table of Contents
