Lcd Backlight; Auto Answering; Localization - Acrowave AVP-2000B User Manual

Wifi sip voip phone
Table of Contents

Advertisement

W
i
F
i
V
o
I
P
P
h
o
n
W
i
F
i
V
o
I
P
P
h
o
n
4.1.3.2 LCD Contrast
This menu is adjusting contrast of LCD window.
There are total 11 steps for adjusting contrast. After selecting menu, by using direction key
[ ] [ ], contrast can be adjusted.
[Using Method]
[Menu]
[3:User Setup]

4.1.3.3 LCD Backlight

In case that key button of AVP-2000B is pressed or when phone is called, this menu is
adjusting time to light up.
There are total 4 steps to be selected.
By using direction key or figure key [ ] [ ], they can be selected.
Always not lighting,
-
[Using Method]
[Menu]
[3:User Setup]

4.1.3.4 Auto Answering

This menu is for user to answer the phone automatically without pressing button [
setting conditions when AVP-2000B is called.
There is mode for user to answer the phone by using button [
also there is other mode for user to answer the phone automatically after bell rings once or
three times.
- 1. No Use
2. Bell Once
By using direction key or figure key [ ] [ ] , they can be selected.
[Using Method]
[Menu]
[3:User Setup]

4.1.3.5 Localization

This menu is setup using language, standard time server, time zone and sunlight saving time
when AVP-2000B is used.
For getting standard time with Internet, standard time server must be designated.
IP address of basic server is 203.254.163.74.
- 1 : using language
By using direction key or figure key [ ] [ ] , they can be selected.
e
e
[2:LCD Contrast]
10 seconds lighting, 20 seconds lighting, always lighting.
[3:LCD Backlight]
3. Bell three times
[4:Auto Answering]
2 : time server setup 3 : time zone setup 4: sunlight saving setup
[2:10 seconds lighting]
[3:Bell three times]
15
] when phone is called and
] with

Advertisement

Table of Contents
loading

Related Products for Acrowave AVP-2000B

Table of Contents