Download Print this page

Advertisement

Quick Links

DRIVEN BY AIR
Air Compressors
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Symbols
In this manual and/or the machine the following symbols are used;
In accordance with essential
applicable safety standards
of Euopean directives
General power tools safety warnings
Working area
Keep working area clean and well lit. Dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
compressor. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
When operating a compressor outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Do not use in rain or humidity conditions. Water entering increases the risk or a short
circuit.
Avoid accidental starting of the tool. Make sure the switch is "OFF" before connecting the
power cord to the grid.
Do not overload compressor. Do not use power tools for a different purpose than the one
for which they are intended.
76456 Issue 2
Warning/ Danger
Read manual before use.
www.pclairtechnology.com
Quick Start Manual
Wear ear protection.
Wear eye protection.
Double insulated.

Advertisement

loading

Summary of Contents for pcl CM2024D

  • Page 1 DRIVEN BY AIR Air Compressors Quick Start Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
  • Page 2 Service Your power tool should be serviced by a qualified specialist using only OEM spare parts. This will ensure that it meets PCL’s required safety standards. Specific safety instrutions for air compressors WARNING! Make sure that both air consumption and maximum effective pressure of pneumatic tools are compatible with the pressure set by the pressure switch and the volume of air supplied by the compressor.
  • Page 3: Operation

    PCL Air Compressors CM2024D/CM2550D/CM3100DT Operation WARNING! Before commissioning must check the oil level in the compressor. WARNING! IN case of any abnormal noise, immediately turn off the tool and contact an authorized service facility for repairs. Assembly and component checking •...
  • Page 4: Cleaning And Maintenance

    PCL Air Compressors CM2024D/CM2550D/CM3100DT air comes out. Then release the safety valve again. • Check oil level: place the compressor on a flat, horizontal surface. The oil level should be between MAX and MIN values of the viewfinder. Start / stop the operation. Compressor start by pulling out the button. (8) To switch off, the button (8) must be pressed down.
  • Page 5: Technical Data

    PCL Air Compressors CM2024D/CM2550D/CM3100DT Maintenance Our machines have been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning. Technical data CM2024D CM2550D CM3100DT Air Receiver...
  • Page 6 PCL’s total liability shall not exceed the net purchase price for the unit. PCL shall be excused for delay or inability to perform obligations due to events beyond its reasonable control.
  • Page 7: Declaration Of Conformity

    CM2024D / CM2550D / CM3100DT Declaration of Conformity Pneumatic Components Ltd, Holbrook Rise, Sheffield, S20 3GE, England Declare under our sole CM2024D / CM2550D / CM3100DT - responsibility that the AIR COMPRESSORS Conforms with the directive Machinery Directive 2006/42/EC and the standards...

This manual is also suitable for:

Cm2550dCm3100dt