Making A Call; Answering A Call; Three-Way Conversation - GE 27909 User Manual

1. Press the cid/vol (- or +) button to scroll to the Security code sub-
menu.
2. Press Menu button to enter the menu. The current security code
123 shows in the display.
3. Use the touch-tone pad to enter your 3-digit security code.
4. Press Menu button to save the setting.
Telephone Operation
Charge/In Use Indicator on Base
The charge/in use indicator on the base will flash to alert you to an
incoming call, during paging, or registration. The indicator will remain
lit when a handset is in the base charging or when the line is in use.

Making a Call

1. Press the TALK/call back button. Dial the desired number.
- OR –
Dial the number first, then press the TALK/call back button.
- OR –
Press the Caller ID-volume(- or +) button to select the desired
record, then press the Talk/call back button.
2. When finished, press the TALK/call back button or put the handset
back into the base cradle to hang up.
NOTE: If you want to delete the pre-dial number you entered,
press the mute/Clear button until all of the digits are erased.

Answering a Call

1. When the phone rings, press the TALK/call back button
Handset or press the Speaker button on base.
2. When finished, press the TALK/call back button
base) again or put the handset back into the base cradle to hang up.
NOTE: If you have turned the Auto Talk function on, you can
pick up the handset from the base to answer the incoming call
directly, without pressing any buttons.
NOTE: Adjust the handset volume by pressing the cid/vol (-
or +) button during a call.
Intercom
1. Make sure the handset is in idle mode, press Menu button, use the
cid/vol (- or +) button to scroll to Intercom.
2. Press Menu button to enter the menu. "INT-Number?" shows in
the display, and then input the called handset number.
3. The called handset will show the calling handset information
"Handset X".
4. Press TALK/call back button in the called handset to answer.
5. When finished, press the TALK/call back button or put the handset
back into the base cradle to hang up.
Note: If the called handset isn't registered to the base, or the
called handset is in talk mode, programming base setting or
reviewing caller ID records, "Unavailable" will be shown on
the LCD display.
Note: If two handsets are in intercom mode and there is an
incoming call, a beep tone can be heard on the handset for the
indication of incoming call. These two handsets must end the
intercom by pressing the TALK key before answering the
incoming call. Or the third handset can answer the incoming
call without affecting the two intercom handsets.

Three-way Conversation

You may have a 3-way conversation using the intercom and an open line.
1. When one handset gets the PSTN line, the second handset presses
TALK
2. After the second handset
handset will display conference, and at the time of conference
on
starts, all the 3 parties will hear conference alert tone.
Note: Conference can allow maximum two handsets
(Speaker button on
handset and the base.
the conference, "Unavailable" will be shown with error beeps.
When any handset(s) gets the PSTN line, the other handset(s)
will show "Line in use".
or the base presses Speaker button.
or the base
When the third handset wants to join
joins the conference, the first
or one
12