Replacing The Batteries - Interwrite PRS RF CLICKER User Manual

Homework Mode – Send
When your Instructor asks you to turn in your homework assignment, you will Send it.
1 If you haven't done it already, join the Class. Press
2 Press
3 Press
You will receive a confirmation message indicating the number of Responses received
out of the number sent (Received XX/XX). You are returned to Answer Mode.
If you are re-sending a homework assignment, only new Responses and the
Responses you changed will be sent. Responses that had been sent previously and
have not been changed in the meantime will not be re-sent.

REPLACING THE BATTERIES

When you see the Low Battery message when you turn on
your Clicker, you have about 15% Battery Life remaining.
Replace the batteries as soon as possible.
1 On the back of the RF Clicker, remove the Screw
holding the Battery Cover in place.
2 Remove the Battery Cover by pushing down on the
Thumb Grip and sliding it toward the bottom of the
Clicker.
3 Remove the old batteries and discard them following the
proper disposal procedures.
4 Insert three AAA batteries, positioning them properly to
ensure the correct polarity.
5 Slide the Battery Cover back into place and replace the Screw.
GTCO CalComp, Inc.
14555 N. 82nd Street
Scottsdale, AZ 85260
USA
TEL: 800.856.0732
480.948.6540
FAX: 480.948.5508
Homework Mode – End
End stops a Homework Session and ends
Homework Mode.
1 Press to return to the Homework Menu.
2 Scroll to the End option. Press
to display the Homework Menu options.
to send your Responses.
GTCO CalComp, Inc.
7125 Riverwood Drive
Columbia, MD 21046
TEL: 800.344.4723
FAX: 410.290.9065
www.gtcocalcomp.com
to display the Setup Menu.
Screw
USA
410.381.6688
5
.
Back of RF Clicker
Thumb Battery
Grip Cover
GTCO CalComp GmbH
European Headquarters
Kreiller Strasse 24
81673 Muenchen
Germany
TEL: +49 (0) 89 370012-0
FAX: +49 (0) 89 370012-12