Table of Contents
Advertisement
Responding to Questions
First Time Users:
Student ID before you can use your PRS
Clicker to transmit Responses.
1
Press
to stop Autoscan.
2
Press
to display the Setup Menu.
3
Scroll
or
option and press
4
Input your Student ID. Press
backspace. If your Student ID contains
alpha characters, refer to the instructions
on the right for entering alpha characters.
5
Press
to save your Student ID.
P R S O V E R V I E W
Your PRS RF Clicker is part of the InterWrite PRS
student response system. You use this RF Clicker in
your classes to respond electronically to questions.
In the typical classroom scenario, you login to, or
join, a Class and send Responses.
During the join process, your Student ID, your
unique identifier, is transmitted to the PRS software
via the RF Receiver. Each time you send a
Response to a Question, your Student ID is
attached to your Response, ensuring each answer
you send is attributed to you. Your Responses are
recorded electronically, and can be scored and
stored in an electronic Gradebook.
B A S I C O P E R AT I O N
1
Slide the Power Switch up to turn the RF Clicker on.
After the initial screen displays, where you will be reminded when it's time to
replace your batteries, your Clicker will begin Autoscanning for a Class to join.
2a Press the Quick Jump number, displayed in angle brackets (< >) on the
Status Bar of the projected PRS screen, to quickly find your Class. Scroll
OR
2b When Autoscanning has completed, scroll
Class and press
You are now ready to participate in a PRS Session.
3
Use the
TABLE OF CONTENTS
Panel
You must enter your
to display the ID: menu
to select this option.
to
or
, if necessary, to your Class and press
to join.
key to clear the ANS: field and prepare for the next Question.
2
2
2
2
2
3
3
3
Specifications and
3
Regulatory Statements
Entering Alpha Characters:
1
Press one of the letter keys
(
Mode and display the selected alpha
character on the LCD screen.
2
Use the
you want to input.
For each letter you want to input, you must
press a letter key to go into Alpha Mode.
Joining a Class
Most of the time you will be using your PRS Clicker
to respond to Questions in the classroom. When you
turn on your Clicker, it automatically begins scanning
for PRS Classes. Each Receiver is broadcasting for
its specific Class. When the Autoscan is completed,
press
or
have found your Class, press
Quick Jump
The Quick Jump feature allows you to bypass the
Autoscan process, which in a large PRS facility can
take a long time. The instructor will display the
Quick Jump Number on the board, along with the
name of the Class you are to join.
Press the Quick Jump Number, press
to scroll to your Class, and press
or
2
) to switch to Alpha
keys to scroll to the letter
to scroll the list of Classes. When you
to join it.
to join,
, if necessary, to your
Panel
3
3
3
3
3
4
4
4
5
6
6
or
to join it.
Advertisement
Table of Contents
Need help?
Do you have a question about the PRS RF CLICKER and is the answer not in the manual?
Questions and answers