Setting a base currency and exchange rates
Before you can make currency conversions, you need to
choose a base currency (usually your domestic currency)
and enter exchange rates.
Note: The rate of the base currency is always 1. The base
currency determines the conversion rates of the other
currencies.
1. Select Currency as the measurement type and select
Options →
Currency
2. Select Options → Rename currency and set the currency
name.
3. Enter a new rate, that is, how many units of the currency
equal one unit of the base currency you have selected. See
the example below:
If you set the Euro (EUR) as the base currency, a United
Kingdom Pound (GBP) is approximately 1.63575 EUR. Thus,
you would enter 1.63575 as the exchange rate for the GBP.
4. Repeat steps 2 and 3 to set up the currency list as needed.
5. To change the base currency, scroll to the currency (usually
your domestic currency) and select Options → Set as base
curr..
Note: When you change the base currency, all previously set
exchange rates are reset to 0 and you need to enter new
rates.
6. When you have finished, press the Done soft key.
7. Press the Yes soft key to save the changes.
rates.
Office
109