Pin Control; Change Pin; Change Pin2 - Motorola P6JL1 Manual

Keep these confidential numbers in a
safe place where you can access them
again if required.
• If you enter PIN incorrectly three
times in a row, the SIM card will be
locked. You must now enter PUK
(Personal Unblocking Key) for that
SIM card in order to unlock it. Please
contact your service provider to obtain
PUK.
• If PUK has been lost, please contact
your service provider.
PIN (Personal Identification
Number 1)
Protects your SIM card from
unauthorized use.
PIN2 (Personal Identification
Number 2)
Needed to set the charge
detail display and to access
additional functions on
special SIM cards.
PUK (Personal Unblocking Key 1)
Used to unlock your SIM
card after PIN has been
entered incorrectly three
consecutive times.
PUK2 (Personal Unblocking Key 2)
Used to unlock your SIM
card after PIN2 has been
entered incorrectly three
consecutive times.
Phone Protects your phone from
code unauthorized use.
If activated, you have to enter
the phone code when the
phone is switched on
(default: 1234).

PIN control

Settings Security
>
control
The PIN code is the password provided
by your network operator and is usually
requested each time the phone is
switched on. You can deactivate this
feature but you then risk unauthorized
use of your SIM card. Some network
operators do not permit deactivating the
control.
1. Press (Change) to activate/
deactivate PIN control.
2. Enter PIN and confirm with
(OK) or

Change PIN

Settings Security
>
Change PIN
You can change PIN to any 4 to 8-digit
number.
1. Enter current PIN code and confirm
with (OK) or
2. Enter new PIN code and confirm
with (OK) or
3. Re-enter new PIN code and confirm
with (OK) or

Change PIN2

Settings Security
>
Change PIN2
To change PIN2, proceed as with
Change PIN.
You cannot deactivate PIN2.
PIN codes PIN
> >
.
> PIN codes >
.
.
.
> PIN codes >
19