Maintenance; Checking For Blockages; Cleaning The Brushroll - SharkNinja Operating Navigator NV250 Series Owner's Manual

MAINTENANCE

CLEANING THE BRUSHROLL

Using a coin, turn locks counterclockwise, then lift the cover to access Brushroll.
DEBRIS WRAPPED AROUND BRUSHROLL
Clean off any debris on the bristles.
s h a r kc l e a n . c o m
DEBRIS BEHIND BRUSHROLL
If you run over a hard or sharp object or
notice a noise change while vacuuming, check
for blockages or objects caught behind the
brushroll.
Clear away any dust, dirt, or blockages in
Debris Intake.
To close the cover, push down until it clicks into
place, then close the locks with a coin.

CHECKING FOR BLOCKAGES

Detach hose from vacuum pod, and check hose
and opening on back of pod for blockages.
Detach wand from power unit, lay unit down, and
check opening for blockages.
Detach dust cup from vacuum pod. Empty dust
cup, remove debris from lint screen, and check for
blockages.
Detach wand from floor nozzle and handle, and
check both ends for blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
s h a r kc l e a n . c o m