SharkNinja Operating POWERED Lift-Away Quick Start Manual

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A Motorized Floor Nozzle
Wand
B
C
Handle
ASSEMBLY
B
1
(Click)
A
Insert wand into
motorized floor nozzle.
3
(Click)
Place pod onto wand and
slide down to connect.
D Crevice Tool
Upholstery Tool
E
F TruePet® Mini Motorized Brush
C
2
(Click)
Insert handle into wand.
D E
Connect hose to back of
pod, pressing until it clicks
into place. Store accessories
on the posts on the pod.
POWERED
LIFT-AWAY ®
Empty dust cup after each use
Pull up on
dust cup
release latch
and lift dust
cup off pod.
Foam filter
Felt filter
HEPA
Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt
filters and rinse them with water.
Post-Motor (HEPA):
4
To access the HEPA filter, reach under the grill and pull the
latch to remove the grill. Remove and rinse the HEPA filter.
(Click)
Easy brushroll maintenance
F
Use a coin to
open the 3 locks
on the bottom of
the floor nozzle.
MAINTENANCE
Hold dust cup over a
trash bin and press the
empty-release latch
on the bottom.
Cleaning Filters
TIP:
Wash filters every
Filter
3 months to keep
the suction strong.
Rinse filters with
water only and allow
them to air-dry
completely. Tap loose
dirt from foam filters
as needed between
washes.
Lift the hinged Remove any string,
carpet fibers, or
lid to access
brushrolls. hair that may be
wrapped around
the brushroll.
When finished,
shut the lid, then
close the 3 locks.
Press top dust
cup release latch
to access dust
screen and remove
built-up debris
as required.