Recording Screen - Tascam DR-05X Reference Manual

2 – Names and Functions of Parts

Recording screen

The recording screen shown below appears when recording
or in recording standby.
1 L evel mode setting status
This icon shows the level mode function setting.
: MANUAL
: LIMITER
: PEAK REDUCTION
: AUTO
2 P lug-in power status
This shows whether plug-in power is on or off.
Plug-in power off
Plug-in power on
3 L ow cut filter status
This shows whether the low cut filter is on or off.
Low cut filter off
Low cut filter on
4 AUTO TONE setting status
This icon shows whether the AUTO TONE function is on or
off.
: AUTO TONE off
: AUTO TONE on
5 R ecording status
This icon shows the recorder operation status.
Icon Explanation
Recording paused (recording
09
standby)
Recording
6 R ecording level meters
These show the input signal levels.
When overdubbing, the levels of the mixed input and
playback sounds are shown.
7 Recording file name
The file name that will automatically be given to the
recorded file is shown.
8 R ecording format
This shows the file recording format and sampling
frequency.
10
TASCAM DR-05X
9 Elapsed recording time
The elapsed recording time of the file appears as hours:
minutes: seconds.
0 Remaining recording time
When stopped, this shows the remaining time (hours:
minutes) of the microSD card. When the remaining
recording time becomes less than one minute, only
seconds will be shown.
q Peak value in decibels (dB)
Peak input level values are shown in decibels.
w R ecording level status
This shows the recording level status.