Applications: Grid Mode..............Error! Bookmark not defined. Grid Protocols ................. Error! Bookmark not defined. 6 Point Grid................. Error! Bookmark not defined. 4 Point Grid................. Error! Bookmark not defined. Applications: Pacing Protocol ............Error! Bookmark not defined. !FUSION SPORT Pty Ltd, 2006...
Page 3
Precautions When Using Batteries ........... Error! Bookmark not defined. Electronic Devices ..............Error! Bookmark not defined. Appendix ....................Error! Bookmark not defined. Care and Maintenance ..............Error! Bookmark not defined. Glossary ..................Error! Bookmark not defined. Trouble Shooting ................. Error! Bookmark not defined. !FUSION SPORT Pty Ltd, 2006...
Page 4
US FCC Modification warning (FCC Part 15.21) Warning: Any changes or modifications not expressively approved by Fusion Sport could void the user's authority to operate this equipment. !FUSION SPORT Pty Ltd, 2006...
Your IPAQ Pocket PC The IPAQ pocket PC offers many of the normal functions of a desktop computer in the palm of your hand. Your pocket computer comes pre-installed with the Smartspeed Pocket PC software, ready to be your assistant in the field.
Failure to do so may erase any data, including the Smartspeed software, from your Pocket PC. DO NOT leave your Pocket PC in the Smartspeed case for prolonged periods of time, as it will eventually become discharged and lose memory.
TART UIDE Prior to assembling and using your SMARTSPEED system, you should ensure that all Reactive Data Units, the Sportsweb Base Unit and the Pocket PC are completely charged. For charging instructions, refer to the maintenance section of this guide.
3. With your PDA pencil, touch once the icon in the top left hand corner named Start. From the drop down box, touch once on the icon named Programs. 5. Touch once the folder located at the bottom of the page named Smartspeed !FUSION SPORT Pty Ltd, 2006...
4. Then select the number of tracks you want to use by touching the down arrow next to the word Tracks. For most reactive protocols, only one track should be used for effective system speed. !FUSION SPORT Pty Ltd, 2006...
Page 10
6. The session layout screen allows you to make notes on the layout and instructions for the protocol. Once you are ready to proceed click the arrow on the bottom right to proceed to the “Sync Field Units” page. !FUSION SPORT Pty Ltd, 2006...
Page 11
Click ok to return to the synchronization screen. 11. Both bars on the top of the screen will be green. 12. Touch once the icon in the top right hand corner named OK. !FUSION SPORT Pty Ltd, 2006...
Page 12
Arrow. 22. Touch once the icon located centre right at the bottom that is named Ready. 23. Touch once the icon located at the bottom right that is named Go. !FUSION SPORT Pty Ltd, 2006...
OK. Do this again in the next page. 9. Pick another drill using the same method as mentioned in Protocol Set Up. 10. If, however you are finished with Smartspeed then touch once the icon located in the top right hand corner named OK.
OFTWARE VERVIEW Viewing and saving data 1. On the opening Smartspeed page touch once the icon located on the bottom of the screen called View. On the pop up box that occurs, touch once the button called Results. 3. On the next screen select the Protocol results you wish to view by touching the particular drill.
(e.g. 1st XI_40m session 1) 4. Then select the folder you wish to save the results to by touching once the drop down bar located next to the icon that is named Folder. !FUSION SPORT Pty Ltd, 2006...
Need help?
Do you have a question about the SmartSpeed and is the answer not in the manual?
Questions and answers