Advertisement
Quick Links
SUPER-RFID
11/28/2006
SUPER-RFID
SP-D300 series long range RF reader
user manual
Shanghai Super Electronic Technology Co. Ltd
Phone: 021-64646641, 64646643, 64692252
Fax: 021－64646643-802 E-Mail:
marketing@superrfid.net
website：http://www.superrfid.net
Page 1 of 9
Advertisement
Related Manuals for Super-RFID SP-D300 Series
Summary of Contents for Super-RFID SP-D300 Series
- Page 1 SUPER-RFID 11/28/2006 SUPER-RFID SP-D300 series long range RF reader user manual Shanghai Super Electronic Technology Co. Ltd Phone: 021-64646641, 64646643, 64692252 Fax: 021－64646643-802 E-Mail: marketing@superrfid.net website：http://www.superrfid.net Page 1 of 9...
- Page 2 SUPER-RFID 11/28/2006 SP-D300 series reader works at 2.45GHz microwave frequency band, communicating with tags wirelessly, exchanging, collecting and update data for tags automatically, and communicating with computers through serial port or wirelessly. Performance Identification range is adjustable from 2 to 80 meters...
- Page 3 SUPER-RFID 11/28/2006 10) Ultra low power consumption, max transmission power is less than 1mW(0dBm) 11) Applied 0.18uM technology to reduce cost 12) Meet harsh industrial environment requirements 13) Anti-jamming capability, tolerance of interfering sources at the scene 14) Applied design techniques of anti-interferences and thunders...
- Page 4 SUPER-RFID 11/28/2006 parameter setup for reader testing software testing software 1: TagFinder.exe Interface is as follows: Serial port number is consistent with the port number reader is using. Refresh time can be changed freely. The following shows how to set Baud rate: Right click the blue bar on the top, choose “set up baud rate”...
- Page 5 SUPER-RFID 11/28/2006 Connect reader to PC, plugging in, making sure parameter settings are correct, and then choose “Tag Stat”, clicking “renew”. Tags in reader’s identification range will be detected and Shanghai Super Electronic Technology Co. Ltd Phone: 021-64646641, 64646643, 64692252 Fax: 021－64646643-802 E-Mail:...
- Page 6 SUPER-RFID 11/28/2006 corresponding ID numbers will be displayed on the screen. Here is illustration: Data analysis can also be done. Choose “Single Tag Finder”, inputting specific Tag ID number, and then click “start” button. Results will be displayed on the screen (reader renews each tag’s ID number every 400 ms.
- Page 7 SUPER-RFID 11/28/2006 Reader testing software 2: rs232a.exe Interface is as follows: Shanghai Super Electronic Technology Co. Ltd Phone: 021-64646641, 64646643, 64692252 Fax: 021－64646643-802 E-Mail: marketing@superrfid.net website：http://www.superrfid.net Page 7 of 9...
- Page 8 SUPER-RFID 11/28/2006 Choose correct port to finish setup, and then start testing. For example, 38400bps, 8 data bits, 1 start bit, 1 stop bit, no check bit The data format of reader transmission and reception: STX（1BYTE） ， RFID_ID(4BYTE) totally 5 ASCII characters...
- Page 9 SUPER-RFID 11/28/2006 Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the SP-D300 Series and is the answer not in the manual?
Questions and answers