Table of Contents
Advertisement
6. Press and hold any button on the remote control of the
device, until the message "Setup is completed" appears in
the Status field.
7. When you have successfully completed the operation, tap
to save the setting and tap
Learning the device
1. Open the remote control list.
2. Select the device you want to learn.
3. Tap Menu → Mapping.
4. Align the IrDA port on your phone with the IrDA port on the
remote control of the device.
5. Tap the button that you want to programme. For example,
if you want your phone to learn "Power", tap it first.
6. Press the corresponding button on the remote control of
the device you added. For example, if you tapped Power
on your phone, press the power button on your remote
control.
When your phone has learned the button, a check mark
appears on the onscreen button.
7. To continue for additional buttons on your remote control,
repeat steps 5 and 6.
8. When you have finished programming, tap
right corner of the screen.
Using a device
1. Tap
to open the remote control device list.
exit the screen.
at the top
Tools
136
Advertisement
Table of Contents
