Table of Contents
Advertisement
7.3.8.
Operation of Print to Match of Printed PowerPoint Manuscript
Print to Match is a facility to make annotations directly on the manuscript printed while the annotations
display accurately on the position of screen. This makes this procedure much easier as the user is not to
move mouse and watch the position on the screen.
Directions as follows:
1.
When printing PowerPoint (PPT) manuscript, a frame must be added: mark "Frame slides" in the
PowerPoint print window.
2.
Enter Whiteboard program, in Mouse or Write Modes, make the calibration process in
PowerPoint slide show mode. After completion you can directly annotate on the PPT manuscript
printed.
3.
To enter calibration operation, hold the button on the pen over 2 seconds in Mouse or Write Mode,
and the screen will be dim slightly and locked, then enter calibration mode, and mouse cursor is
like this
.
4.
Calibration operation:
4.1
locate standard of anchor point 1:
Select an easily found position on the left side of the paper, such as a dot, or beginning
of letter. After anchor point 1 founded, move the mouse cursor by mouse to the
16
Advertisement
Table of Contents
