Page 1
’ ’ < – > < – > * Product Introduction Super slim & light mobile storage device using 1.8” HDD Supporting USB2.0 with lightning speed Blue LED for operation indicator No external power required Plug & Play and Hot Plugging Scheduling auto back-up software Aluminum for heat management &...
Page 2
< Please refer to the Installation Procedure > Disassembly of the cover Assembly of HDD Assembly of the cover Cable connection and switching (page 5) Driver Installation (page 6) Partition and format (page 7) Ready to use (page 8)
< Contents > Feature and caution 1. Name of each part and Contents 2. Products Specification 3. System Requirements 4. Cable connection and switching 5. Driver installation 6. Partition and format 7. Ready to use 8. How to use HardCopy (Auto backup software) ? 9.
Page 4
1. Name of parts and contents 2. Specification Interface USB 2.0 Model SPIO 182 / SPIO 185 480Mbps Transfer Rate Hard Disk 1.8 INCH, 5mm/8mm IDE Hard Disk Dimension 103mm x 61mm x 17mm (D x W x H) Weight...
5. Driver installation Driver installation for Windows 98 User Before connecting the Mobile HDD to your computer, double click the file “USB-IDE98_v1016B.exe”, and install the driver at your computer. Follow the installation process in Figure 1~3 Figure 1. After double click “USB-IDE98_v1016B.exe”, InstallShield Wizard will start. Figure 2.
6. Partition and Format * Caution : The driver should be Installed before partition and Format. To partition new hard disk, run the fdisk command. 1) Fdisk and format of new hard disk at windows 98 / ME a. Install the driver after connecting the product to computer (Driver is installed automatically under Windows ME) b.
3) For MAC * Caution : The driver should be Installed before “partition and Format”. 1) MAC OS 8.6 Higher 2) Mobile HDD can’t be detected in the computer without this process.. Install the driver first and then initialize it. 3) If you want to use Mobile HDD in both MAC and IBM system, do fdisk and format in IBM computer.
Page 9
To back up the data for the first time 1. Backup List: List Job name, update time, and status. (A) Status * “Start” – Start copy. * “Enable” – Active state. Regular backup will be done with specified period * “Disable” – Inactive state. No more regular backup activity. * “Copy”...
9. Trouble shooting 1) Mobile HDD is not recognized in the system after plugging. - If your OS is windows 98 SE, check if drive installation is finished well, or not. - If you bought new HDD, check if partition and formatting is completed or not. 2) Mobile HDD dosen’t work well with “clicking”...
Page 11
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This Device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment.