General Information; General Warnings; Generalities; Manufacturer - STI FasTrak Installation And Maintenance Instruction Manual

1.0 GENERAL INFORMATION

1.1 General warnings

Important
This Instruction Manual is an integral part of the device, it should be carefully read before
carrying out any operation and it should be kept for future references.
This Instruction Manual covers only the FT positioner.
This Instruction Manual is realized in accordance with the Directive 2006/42/CE.

1.2 Generalities

STI S.r.l. products are conceived, manufactured and controlled according to the Quality Control System in compliance
with EN ISO 9001 International Standard.

1.3 Manufacturer

With respect to Machinery Directive 2006/42/EC the Manufacturer of the described product, is STI S.r.l. as specified on
nameplate.
Address: STI S.r.l.
Via Dei Caravaggi 15
24040 Levate (Bergamo) – ITALY

1.4 Terms and conditions

STI S.r.l. guarantees each single product to be free from defects and to conform to current goods specifications. The
warranty period is one year from the date of installation by the first user, or eighteen months from the date of shipment
to the first user, whichever occurs first.
The warranty does not cover special products or components not covered by warranty in their turn by subcontractors.
No warranty is given for products which have been subject to improper storage, improper installation, misuse, or
corrosion, or which have been modified or repaired by unauthorised personnel. Repair work due to improper use will
be charged at standard rates.

1.5 Manufacturer's liability

STI S.r.l. declines all liability in the event of:
•
use of the device in contravention of local safety at work legislation;
•
incorrect installation, disregard or incorrect application of the instructions provided on the nameplate and in
this manual;
•
modifications without STI's authorisation;
•
work done on the unit by unqualified or unsuitable persons.

1.6 Applicable Standards and Directives

•
EN ISO 12100:2010: Safety of machinery - General principles for design. Risk asses and risk reduction.
•
2006/95/EC: Directive for Low Voltage Equipment (LV).
•
2004/108/EC: Directive relating to the Electromagnetic Compatibility (EMC).
•
2014/34/UE: Directive concerning equipment for use in potentially explosive atmospheres (ATEX).
_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY
Manual 4028 – rev.06 11/2018 – FT
INSTRUCTION MANUAL
FasTrak
®
www.imi-critical.com
- 3 -