Advertisement
Quick Links
Advertisement
Related Manuals for Si Tech Glove Lock QCP
Summary of Contents for Si Tech Glove Lock QCP
- Page 1 Glove Lock QCP User Manual www.sitech.se...
- Page 2 • The different Spanner Rings included in the package allows use of We want to congratulate you on your purchase of the Glove Lock QCP, a Dry Glove a great variety of seals and gloves. The different Spanner Rings are system developed and manufactured by SI TECH in Sweden.
- Page 3 It was developed and launched years before the Glove Lock QCP. The Glove Lock QCP however was designed so that the user of Quick Cuff could benefit from it when choosing the Glove Lock QCP. For illustrative reasons we are using a yellow Wrist Ring. ( This is not an available product!) 1a.1 Find appropriate Spanner Ring and move...
- Page 4 www.sitech.se 2. Attach glove 3. Donning Equalization Tube 2.1 Start by finding appropriate Spanner 2.2 Place the Spanner Ring on the inside of 3.1 Put your hand through the seal and fit the 3.2 Join the rings together (make sure that the glove, make sure to find proper position Ring.
-
Page 5: Troubleshooting
Troubleshooting Maintenance and Storage • If high resistance occurs, disassemble and lubricate with SI TECH Lube Stick. • After every dive you should check for damage or debris and clean the system with fresh water. • If the rings are misaligned, disassemble and don again. -
Page 6: Spare Parts
Our products have been trusted by divers for more than 40 years Spare Parts SI TECH is a Swedish company focusing on manufacturing and marketing of components for protective suits such as; drysuits, rescue suits garments designed diverse hostile Item no. - Page 7 SI TECH AB | Glove Lock QCP manual | Version: 2.0 | February 6, 2013 www.sitech.se...
Need help?
Do you have a question about the Glove Lock QCP and is the answer not in the manual?
Questions and answers